Using your Freestyle 90
13
To dial a stored number
• Press the TALK button.
• Press the QUICKDIAL button.
• Press the 0-9 location code under
which the number you want is
stored. The number is dialled
automatically.
To store a number of more than
20 digits
• Press the QUICKDIAL button.
• Press one of the 0-9 buttons to set
the location code under which
your phone number will be stored.
• Dial the first 20 digits.
• Press the QUICKDIAL button. You
hear a confirmation beep. The
number is stored.
• Press the QUICKDIAL button
again.
• Press another 0-9 button to select
a second location code under
which to store the remaining
digits.
• Dial the remaining digits.
• Press the QUICKDIAL button.
You hear a confirmation beep.
The rest of the number is stored.
To dial a stored number of more
than 20 digits
• Press the TALK button.
• Press the QUICKDIAL button, then
the first 0-9 location code
number. The number begins
dialling automatically.
• When the first part of the number
has been dialled press the
QUICKDIAL button again, then the
second
0-9 location code number.
The rest of the number is dialled.
To change a stored number
Any existing number stored in the
memory can be overwritten by
entering a new number under the
same location code. Simply follow
the steps shown in ‘To store a
number in the memory’, page 12.
To clear a stored number
• Press the QUICKDIAL button.
• Press the 0-9 location code.
• Press the QUICKDIAL button
again.
• You hear a confirmation beep.
You can mix manual and memory
dialling as required. For example,
you can dial the area code 0181 380
from the memory and then complete
the number manually.
To Next Page
Loading...
Need help?
General
