38
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Change remote access security PIN code
1. Press the Left soft key Menu, the display shows ANS MACHINE,
press
.
2. Press
or
until ANS SETTINGS is displayed and
press
to select.
3. Press
or
to display CHANGE PIN and press .
4.
OLD PIN? is displayed, enter the current PIN and press .
5.
NEW PIN? is displayed, enter your new PIN and press .
Re-enter the new PIN when the display shows
CONFIRM?
and press
.
6. Press and hold
to return to standby.
Switch answering machine on
If you forget to switch on your answering machine before leaving
home, you can do it from another phone.
1. Dial your phone number and after 20 rings your BT3550 will
answer. When the message starts press
*
and
you will hear, “Please enter your security code”. Enter your
4-digit code.
2. Press
to switch the answer machine on.
Check for messages
1. Dial your phone number. When you hear your outgoing
message, press
*
. You will hear, “Please enter your
security code”.
2. Enter your 4-digit code and your machine announces
“To hear main menu, press 1. Press 1 to listen to menu options
or press 2 to play all messages”. The new messages are then
automatically played back to you.
Keep a note of your remote access
security PIN code.
The default PIN setting is 0000.
If you enter the incorrect PIN code,
you will hear “Incorrect security
code”. You have two chances to enter
the correct remote access security
code before your BT3550 hangs up.
If you do not press any button for
4 seconds during Remote access,
your BT3550 will hang up.
To Next Page
Loading...
