26
If you experience any problems, please visit www.bt.com/producthelp
The default setting is on.
4. The current setting will be displayed. Use the or
buttons to select either
On or Off and press to confirm.
Remote access
When switched on, you can call in from another phone to listen to
your messages and operate your answering machine.
Switch remote access on or off
1. Press the button. Answer Machine will be displayed,
press
.
2.
Answer Mode will be displayed, press to scroll to Answer
Settings and press .
3.
Answer Delay will be displayed, scroll to display
Remote Access and press .
4. The current setting will be displayed. Use the
or
buttons to select either
On or Off and press to confirm.
Set/change the remote access security code
The default code is 000 but you can change this to a 3-digit
code of your choice to help prevent unauthorised access to your
answering machine.
1. Press the
button. Answer Machine will be displayed,
press
.
2.
Answer Mode will be displayed, press to scroll to Answer
Settings and press .
3.
Answer Delay will be displayed, scroll to display
Remote Access and press .
4. Press
to scroll to Set Remote PIN and press .
5.
Enter Old PIN will be displayed. Enter the old code (default
code is 000) and press
.
6.
Enter New PIN will be displayed. Enter a 3-digit code of your
choice and press
.
7.
Re-Enter PIN will be displayed. Enter the new code again and
press
. The display will show Completed and then return to
standby.
To Next Page
Loading...
