6
If you experience any problems, please visit www.bt.com/producthelp
If you have subscribed to a Caller
Display service the time and date
will be set automatically when you
receive your first call.
Set the time and date on the display
You will need to set the correct time and date so that you know
when each answering machine message was received. The time
and date will be shown on the display when in standby.
The default time format is 24 hour, but you can change this to
12 hour if you want to, see below for instructions.
Set the time
1. Press the button. Answer Machine is displayed.
2. Press
or to scroll to Date and Time and press .
3.
Time is displayed, press .
4. The first digit of the time flashes. Use the keypad to enter the
time, using 2 digits for the hour and 2 digits for the minutes.
If the 12 hour format is set you can use the
or
buttons to alternate between
AM and PM. Press to confirm.
Set the date
1. Press the button. Answer Machine is displayed.
2. Press
or to scroll to Date and Time and press .
3.
Time is displayed, press to display Date and press .
4. The current date is displayed with the first digit flashing. Use
the keypad to enter the date using 2 digits for the day, 2 for
the month and 4 for the year. Press
to confirm.
Set the time format
1. Press the button. Answer Machine is displayed.
2. Press
or to scroll to Date and Time and press .
3.
Time is displayed, press
to display
Time Format and
press
.
4. Press
or to select either 12 hour or 24 hour
and press
.
Your BT Decor 2500 is now ready for use
The default setting is 00:00
The default setting is 01-01-2011.
The default setting is 24 hour.
To Next Page
Loading...
