B Replace an existing BT Voyager router
1 Turn off your router at the mains power socket and unplug its power cable.
2 Unplug the DSL cable from your router’s DSL socket as well as from its ADSL
lter (you can leave the lter plugged into its phone socket for the moment).
3 If tted, unplug the ‘phone line’ cable and any telephone from your router
(Voyager 220v and 2500v only).
4 Unplug the Ethernet or USB cable from your router.
5 Set aside this old Hub and the cables you’ve just unplugged.
6 Follow the Quick Start guide in your welcome pack to set up your new
BT Home Hub.
For information on disposing of electrical equipment, see page 35.
C Replace another modem/router
If your computer has a built-in modem or router, unplug the cable between your
computer and the phone socket.
If your computer connects to a separate modem/router:
1 turn off your modem/router
2 unplug any cables between your modem/router, computer, the phone socket
and the mains power socket. You can leave any ADSL lters in phone sockets
3 set aside the old modem/router and cables
4 follow the Quick Start guide in your welcome pack to set up your new
BT Home Hub
For information on disposing of electrical equipment, see page 35.
To Next Page
Loading...
Need help?
General
