C I want to connect my computer using the Ethernet cable
1 Check that your computer has a spare Ethernet port. This is a small socket on
the back or side of your computer and is usually marked LAN, Ethernet,
or
. If you aren’t sure, check the information supplied with your computer.
If you don’t have an Ethernet port, see page 33.
2 Plug one end of the Ethernet cable (yellow ends) into one of your Hub’s
Ethernet sockets.
3 Plug the other end of the Ethernet cable into your computer’s Ethernet socket.
4 Open your web browser – you should be on the internet. If you can’t connect to
the internet, please restart your computer and try these steps again – or follow
any related on-screen troubleshooting instructions.
To Next Page
Loading...
