Electrical system 5000
Control console (5510)
Publication No. Date Valid from serial number T-code
261828-040 2008-08-21 6051502 815, 816
© BT Repair Manual RRE140/160/180/200/250 13 – 9
Replacing the display
WARNING!
Static electricity!
Risk of static discharge that can damage the electronics.
Before starting work on the electronics, make sure you take the nec-
essary steps to prevent static electricity, in other words, ESD protec-
tion.
1. Carry out items 1–6 as described in "Dismantling the control con-
sole".
2. Carefully prise the display out of its border and install the new dis-
play.
3. Make sure the locking catch is fully down, and insert the contact in
the display. Press together, and use the catch to pull the contact to
-
gether; then lock the catch in place on the contact.
4. Reassemble in reverse order.
13.2.6 Assembling the control console
Reassemble in reverse order.
To Next Page
Loading...
