BT RRE160 - Placing the Free Lift Cylinder in the Truck

Hydraulic system 6000
Free lift cylinder (6620)
Publication No. Date Valid from serial number T-code
261828-040 2008-08-21 6051502 815, 816
© BT Repair Manual RRE140/160/180/200/250 14 – 21
14.6.3 Placing the free lift cylinder in the truck
1. Secure a lifting strap around the free lifting chain bracket by the end
of the free lift piston and a lifting strap around the free lift cylinder
(see diagram).
2. Lift the free lift cylinder into its correct position.
3. Fit the free lift cylinder using its mounting bolts.
4. Take away the traverse.
5. Fit the chain adjuster.
6. Fit the free lifting chain with its pin.
7. Fit the split pin.
8. Remove the straps from around the free lifting chain.
9. Lift the inner guide using a traverse.
10. Place the twin hose and the cable on the free lift cylinder’s hose
reels.
11. Take away the traverse.
12. Remove the plugs on the free lift cylinder.
13. Fit the feeder pipe to the free lift cylinder.