Hydraulic system 6000
Hydraulic connections (6230)
Publication No. Date Valid from serial number T-code
261828-040 2008-08-21 6051502 815, 816
© BT Repair Manual RRE140/160/180/200/250 14 – 15
Dismantling the quick change connector
1. Remove the assembly stop (with the aid of a screwdriver or
similar tool).
2. Push the male fitting all the way into the female fitting.
3. Pull the male fitting out of the female fitting.
4. Refit the assembly stop on the male fitting.
5. Place protective plugs on the valve and hose.
To Next Page
Loading...
