19 – 2 Repair Manual RRE140/160/180/200/250 © BT
Wiring diagrams
Components
T-code Valid from serial number Date Publication
No.815, 816 6051502 2008-08-21 261828-040
B30 Battery in original position Inductive sensor
B31 Safety pedal Inductive sensor
B32 Pedals (acceleration and
brake)
Hall sensor Nominal output voltage:
0.5 V (min.)
4.5 V (max.)
B33 Height reference, mast near
bottom position
Inductive sensor
B35 Horn Horn
B36 Travel direction selector Hall sensor
B38* Height preselector, next level Hall sensor
B39* Height limitation override Hall sensor
B40* Forks to horizontal position Hall sensor
B41* Sideshift to centre position Hall sensor
B42* Change of function for fifth
mini lever
Hall sensor
B43* Cabin tilt activation Hall sensor
B44* Activation of extra function 1 Hall sensor
B45* Activation of extra function 2 Hall sensor
B46 Height reference mast lower-
ing
Inductive sensor Distance: 0-6.5 mm
B47* Sideshift sensor left-hand
side
Magnetic sensor
B48* Sideshift sensor right-hand
side
Magnetic sensor
B49 Seat switch Inductive sensor Distance: 0-6.5 mm
B50* Fork camera Camera
B57 Height reference, mast lower-
ing
Inductive sensor
B58 Height reference, forks below
1 m
Inductive sensor
B90 Height reference, mast lower-
ing
Inductive sensor
E3* Working light Lamp
E4* Working light Lamp
E5* Working light Lamp
E6* Working light Lamp
E10* Seat heater Resistor
F1 Fuse for [T1] Fuse 160 A/200 A
F3 Fuse for [T2] Fuse 250 A/325 A
F60 Fuse for relays Fuse 3 A
Designation Function Component type Other
To Next Page
Loading...
