7
Configuration & Settings
Contact setting - call codes can be set with a lenght from 1 to 8 digits. Door lock codes can be set with a lenght from 4 to 9 digits.
ADDRESS BOOK
Contact setting
New contact
Modify contact
ADDRESS BOOK
Contact setting
New contact
Modify contact
ADDRESS BOOK
Contact setting
New contact
Modify contact
ADDRESS BOOK
Call code digits 4
Lock code digits 5
EXIT
Aaaaaa
Call code digits : default 4 digits
Door lock release code digits : default 9 digits
Modify contact - this function gives you the possibility to change the selected contact.
Entering a new contact- this function gives you the possibility to enter new residents in the address book.
For each resident is possible to set the following parameters :
ID Number : identification progressive number automatically assigned by the device to each resident. This function gives you the possibility
to change this ID with a 4 digits number asigned by the installer.
Surname : surname of the resident.
Name : name of the resident.
Public : set on (YES), the name and the surname of the resident will appear on the display during the call selection.
set on (NO), the name and the surname are hidden. Resident call is possible by entering the call code.
Apart address : SCS address of the corresponding handset.
Call code : numerical call code assigned to the resident.
Lock code : door lock release numerical code.
Select the contact to change
and confirm with
Digital colour entrance panel
with addresses list
322011
BT00853-a-EN 03/09/2014
To Next Page
Loading...
Need help?
General
