Do you have a question about the Bticino D45 System and is the answer not in the manual?
Model | D45 System |
---|---|
Brand | Bticino |
Wiring | 2-wire |
Material | Plastic |
Color | White |
Storage Temperature | -20°C to +60°C |
Relative Humidity | 20% to 90% non-condensing |
Detailed overview of the entrance panel, its features, and calling methods.
Key technical parameters including power, absorption, camera, lens, and environmental ratings.
Physical dimensions of the entrance panel unit, labelled A, B, and C.
Identifies connectors and controls on the rear of the entrance panel.
Physical dimensions for the flush mounting box, labelled A, B, and C.
Steps to access and navigate the configuration menu using the device keyboard.
Procedures for changing, setting, and recovering the device password.
Accessing and adjusting panel settings like brightness and contrast.
Setting a custom welcome message and its display timeout on the home screen.
Procedure to restore the entrance panel to its factory default settings.
Configuring the address book and how resident names are displayed on the screen.
Setting the method for calling residents via apart address or call code.
Enabling automatic call repetition for a set duration and interval.
Defining call code and door lock code lengths for new contacts.
Process for adding new residents or changing existing contact details.
Steps to remove a specific resident's entry from the address book.
Procedure to erase all resident contacts from the address book.
Configuring speaker module settings and viewing firmware versions.
Instructions for direct calls to the switchboard and releasing the door lock by code.
Configuring the device using SF2 software and PC connection via hardware tool.
Adjusting video signal compensation based on transmission distance using DIP switches.
Diagram illustrating the connection for the door lock relay and associated parameters.