Operation2
38
You can deactivate (reactivate) one or more zones at any time. This
will allow you to personalise the burglar-alarm operation according to
your needs.
For instance, if you want to have protection even if you’re not at home,
you can deactivate the infrared detector zones, leaving the outer zones
(entrance door and windows) active. This will allow you to move around
freely inside your house without making any alarms go on and without
giving up safety.
The zones in which your burglar alarm is split into appear in the rst
line of the display.
The active zones are shown in a dark box.
the following example shows the system made up of 4 zones, all active;
zone 3 is deactivated.
Activating - deactivating the zones ■
The zones (max. 4) of the system are
all active (e.g. 1-2-3-4)
Press the corresponding key on the
Unit keypad to deactivate zone 3
The display shows zone 3 without
the dark box (deactivated)
Press the
/
key
Type in the user code (basic 00000)
or an enabled numeric code
With user code ✔
1 2 3 4
25/02/08 12:23
1 2 3 4
25/02/08 12:23
1
2
ABC
3
DEF
MNO
6
JKL
5
GHI
4
7
PQRS
8
TUV
9
WXYZ
0
/
3
DEF
/
To Next Page
Loading...
Need help?
General
