Btwin Original 7E - Control Buttons Functionality

13
E
ODO:Globaldistancecounter (in km)
0-99999 km
By default, ODO mode appears on the screen.
F
TRIP:Partialdistancecounter (in km)
0-1000 km
Reset by pressing for 1.5 seconds on the MODE button.
G
Batterylevel
Five battery levels
When the battery level is too low, the indicator starts to ash.
Warning, when you make heavy use of the assistance, the charge
indicator is likely to vary temporarily to indicate the instantaneous
overconsumption.
You are advised to check the battery charge indication when halted.
H
Speedindicator
Indicates the speed in real time with an accuracy of +/- 2%
I
Lightingindicator
The lighting indicator appears on the screen when the lights are on.
J
Speed unit (km/h)
If a problem occurs, the display will indicate an error code. In this case, contact
your store for a diagnosis and repair.
PUSH BUTTON DESCRIPTION (TILT-E)
ON/OFFbutton
Switch the electrically-assisted bike on and off by pressing
for 1 second. When the system is on, the ON / OFF button is
lighted.
Lightingbutton
Switch the bike lights on and off by pressing for 1 second.
When the lights are on, the lighting button is lighted.