Btwin Original 7E - Battery Installation, Removal, and Charger Precautions

16
INSTALLING AND REMOVING THE BATTERY
INSERTION
Before inserting your battery into its position (sheath), ensure that the key is in
the unlocked position (key in vertical position) and that no object or foreign body
is inside the sheath.
Once inserted, ensure the battery is correctly locked by turning the key (key in
horizontal position), then remove your key.
REMOVAL
Before removing your battery from its position (sheath), ensure you have unlocked
it by placing the key in the unlocked position (key in vertical position).
Then remove your battery by pulling it.
IMPORTANTNOTES
It will be impossible to lock your battery and remove the key if the battery is not
in the correct position and sufciently inserted into its seating.
Please do not attempt to insert or remove your battery when the lock is locked
(horizontal position): This may break the security lock on your battery.
CHARGING THE BATTERY
PRECAUTIONSTOBETAKENWITHTHECHARGER
Only for use indoors
Do not throw it away in inappropriate containers
Risk of electrocution