EasyManua.ls Logo

Btwin Original 7E - Maintenance And Lifetime (Warranty Condition); Self-Diagnosis

Btwin Original 7E
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
MAINTENANCE AND LIFETIME
(WARRANTY CONDITION)
• Never store the battery discharged (1 ashing green LED) to avoid any deep
discharge which could lead it to malfunction.
• In case of extended storage, recharge the battery at least every 3 months.
• To guarantee an accurate indication of your battery status (when the status
indication button is pressed), we advise you to fully charge it every 6 months
and then completely discharge it (this operation "calibrates" the battery
status).
SELF-DIAGNOSIS
The battery has a self-diagnosis tool which allows you to know its status at all
times.
This operation is possible using the push button on the battery.
Batterystatusindicationtable
Charger
LED
Meaning Action
Press and
holdthe
battery
statusbutton
11 to 20%
Indication of
the battery
charge status
(measurement of
the actual capacity)
21 to 40%
41 to 60%
61 to 80%
81 to 100%
(1)
Battery in safe mode
Recharge the
battery urgently
Low capacity < 10%
Undervoltage
protection
Temperature
protection
Please return the
battery to your after-
sales service
Short-circuit protection
Other protection
= LED off, = LED ashing, = LED permanently on
(1) IMPORTANTNOTE: If no LED lights up on the battery when the battery status
button is pressed, you must immediately connect the battery to its charger.
Two cases are then possible:

Related product manuals