C−LRV lift control valve Operation
74/92
300−I−9010212−E−10/08.08
Setting "Demand val. red."
S Setting the sensitivity of the automatic demand−signal reduction
S Standard: Normal
S Functions
−Off
− Few sensitivity
− Normal
− Sensitive
Setting "Start delay"
S Pause between command and start of travel
S Higher value: longer pause
S Setting range: 0.1–1.0s
S Standard: 0.1s
Setting "Relay function"
S Either the relay on the power supply unit switches (⇒ 1.5.1) only
when there is an SIU fault, or it switches with any fault
S Standard: only SIU
S Functions
− only SIU
− all errors
To Next Page
