18
6 Maintenance BÜCHI Mini Spray Dryer B-191
6 Maintenance
Follow all instructions aimed at keeping the Mini Spray Dryer
in a reliable operational state. This includes periodic cleaning
and inspection for noticeable damage.
Check that the plug has been pulled out and that the com-
pressed air and cooling water are both switched off before
maintenance work on the apparatus.
6.1 Cleaning
The glassware is to be cleaned with the usual cleaning agents
(e.g. mild soap solution).
The housing is to be cleaned with a damp cloth without the
use of organic solvents and to be visually inspected for defects
(operating elements, plug). Defective apparatus components
are to be replaced.
6.2 Customer service
Repairs to the apparatus may only be carried out by authorized
service technicians. These are persons with a sound technical
training and knowledge of the dangers which result from not
observing safety regulations.
Authorized Büchi service centers have a special service manu-
al available to them.
To Next Page
Loading...