Need help?Do you have a question about the Buchi B-585 and is the answer not in the manual?
General| Model | B-585 |
|---|---|
| Control | Digital |
| Temperature Accuracy | ±1 °C |
| Temperature Stability | ±0.5 °C |
| Timer Range | 1 min to 99 h 59 min |
| Frequency | 50/60 Hz |
| Material | Stainless Steel |
| Display | Digital |
Explains the meaning of warning, stop, and note symbols used in the manual.
Outlines qualifications for personnel operating the device and management responsibilities.
Defines the intended uses of the device, such as drying, distillation, and sublimation.
Details prohibited uses of the device and the operator's responsibility for damages.
Lists potential hazards associated with operating the device, including chemical and physical risks.
Specifies required protective gear and availability of instructions for personnel.
Explains the over-temperature cut-out feature that switches off heating at 320°C.
Specifies requirements for the device's installation environment, including clearance and surface.
Details electrical connection requirements, including grounding and voltage checks.
Details how to change temperature and rotation speed in manual operation mode.
Details the display arrangement and operation procedure for program mode.
Guides on modifying, creating, or deleting programs, including step-by-step temperature and time settings.
Describes the two types of distillation (single and fractional) possible with the Kugelrohr configuration.
Details the procedure for performing a simple distillation using the Kugelrohr setup.
Explains how to separate mixtures based on boiling point differences using the Kugelrohr setup.
Lists potential error messages, their causes, and recommended remedies.
To Next Page