1
Glass Oven B-585
Contents
Contents
5 Operation 11
5.1 Overview program structure 11
5.2 Basic display arrangement 12
5.3 Operation of the B-585 Drying 16
5.4 Operation of the B-585 Kugelrohr 19
5.5 Accessories: Sublimation and freeze drying 22
5.6 Converting the Glass Oven configurations 23
6 Maintenance 26
6.1 Cleaning 26
6.2 Service 26
6.3 Customer service 26
7 Taking out of operation 27
7.1 Storage / Transport 27
7.2 Disposal 27
8 Replacement parts 28
8.1 B-585 Drying configuration replacement parts 28
8.2 B-585 Kugelrohr configuration
replacement parts 29
8.3 Sublimation accessory replacement parts 29
9 Appendix 30
9.1 Technical data 30
9.2 Error massages 30
9.3 Materials used 31
9.4 Declaration of conformance 32
EN Version G
as of Software-Version 1.1 (32 pages) Order Code
B-585 Instructions 096981
Please read these instructions thoroughly before using the Glass
Oven B-585. Keep these instructions in the imme diate vicinity
of the device so that they can be referred to at any time.
Chapter 2 contains important safety advice. These infor mation
is vital to the safe operation of the glass oven.
The right to make technical changes without notice is re ser-
ved. No portion of these instructions may be repro du ced in
any man ner, nor may it be edited, copied or distri buted using
any electro nic or optical systems without the expres sed written
consent of Büchi Labortechnik AG.
All rights reserved.
Copyright © Büchi Labortechnik AG, 2004
1 Scope of delivery 2
1.1 Glass oven for drying 2
1.2 Glass oven for ball tube (Kugelrohr) distillation 3
2 Safety 5
2.1 Symbols 5
2.2 Requirements to be met by the customer 5
2.3 Proper use 5
2.4 Improper use 6
2.5 General hazards 6
2.6 Safety measures 7
2.7 Over-temperature protection 7
3 Function 8
3.1 Working with the glass ovens 8
4 Putting into operation 10
4.1 Installation location 10
4.2 Power connections 10
4.3 Installation of the glass parts and
the drive unit 10
To Next Page
Loading...