7
Digestion Unit K-435 4 Installation
4 Installation
4.1 Placement
The apparatus must be set up on a stable, clean, and level
surface.
The apparatus must be placed with its back at a minimum of
30 cm from walls and other objects in order to prevent
damage. Containers, chemicals, or other apparatus may not
be placed behind the unit.
4.2 Unpacking
Keep the original packaging for the event of a later transport.
If the packaging has been damaged, check the apparatus
carefully for glass breakage or damage to the casing.
Ensure that the voltage of the power outlet corresponds to
the voltage given on the apparatus plate. Always connect the
apparatus to a grounded outlet. This will avoid risks due to
internal defects.
4.3 Connection to Power Supply
Before the K-435 is turned on for the first time, ensure that
the power supply voltage corresponds to the voltage given on
the apparatus plate.
Then connect the apparatus to the power supply with the
apparatus cable.
To Next Page
Loading...
