6.2.7 Melting result
NOTE
Changing the determination mode does not affect the principle of measurement, but it does influence
the interpretation and the appearance of the results. The mode can be selected in the settings menu.
The default and most frequently used mode is the pharmacopoeia melting point. Melting range is
convenient for substances with a wide melting range. The thermodynamic melting point should be
used for special application only. For detailed information see Section 4.1.1.
• In the settings, change the
melting result to Melting
point pharmacopoeia
and press Save.
• In the settings, change the
melting result to Melting
range and press Save.
• In the settings, change the
melting result to Melting
point thermodynamic
and press Save.
Melting point pharmacopoeia
• In the settings, change the
melting result to Melting
point pharmacopoeia
and press Save.
To Next Page
Loading...