When a measurement is done, the last method parameters are always retained in the instrument. To
start the same method, just press START.
NOTE
Results are stored in memory until a new measurement is started or the instrument is switched off.
6.3.5 Printout
a
b
c
d
e
f
Printout
a Instrument type
b Determination parameters
c Automatically detected results
d Manual results
e General information
f Signature of person making the de-
termination
Boiling temp. = Temperature sample boiled.
Boiling point = Boiling temp. corrected according entered baro-
metric pressure.
If a barometric pressure of 1013 mbar is entered
boiling temperature and boiling point results are
equal.
To Next Page
Loading...