Modules for Logamatic 4000 control panels - We reserve the right to make technical modifications.
16
Module installation for Logamatic 43xx controls3
z Position terminal cover and fasten with the screws.
z Test the function of the modules.
For more detailed information, see the operating or service
instructions for the Logamatic 43xx control panels.
USER NOTE
If no 120 V power supply for the module or its 120 V components
is installed (e.g. plugs not connected), the components in question
(e.g. pumps) will not be powered.
This malfunction cannot be detected at the affected module,
because the LED and the control functions operate independently
of this power supply.
To Next Page
Loading...
