Buderus Logamatic 2107 Applications Manual

8
|
Logamatic 2107 Controls
Applications Manual
Logamatic 2107 Controls applications manual | 06.2018
Technical specifi cations are subject to change without prior notice
US
C
®
This product has been tested and is certifi ed for
both the US and Canadian markets and meets all
applicable US and Canadian standards.
Notice:
To match the typical building, the following factory settings may
need adjustment:
BLDG RESP: Change to 1 if typical 2x4 or 2x6 construction
MAX TEMP: Change to 185-190°F if high temperature
baseboard is used
OASETBACK: Change to SETBACK if no room sensor is being
used or
RMSETBACK: if a room sensor is present
Refer to page 10 for additional details.

Buderus Logamatic 2107 Specifications

General

Category	Control Systems
Type	Heating Control Unit
Voltage	230 V
Frequency	50 Hz
Protection class	IP20
Ambient temperature	0°C
Application	Heating systems