EasyManua.ls Logo

Buderus Logamax plus GB162-100 User Manual

Buderus Logamax plus GB162-100
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
User Manual
Condensing gas boiler
Logamax plus
GB162-65/80/100
7217 5100 (03/2010) GB
For the end user
Please read thoroughly
before operating the boiler.
Question and Answer IconNeed help?

Do you have a question about the Buderus Logamax plus GB162-100 and is the answer not in the manual?

Buderus Logamax plus GB162-100 Specifications

General IconGeneral
ModelLogamax plus GB162-100
TypeCondensing Boiler
Fuel TypeNatural Gas
Output100 kW
Max. Output (Natural Gas) 80/60 °C100 kW
Efficiency (80/60 °C)98%
Modulation1:10
NOx Emission Class5
Max working pressure6 bar

Summary

For Your Safety

Intended Use and General Safety Precautions

Outlines the boiler's intended purpose and critical safety measures for user operation.

Safety - Maintenance and Compliance

Boiler Maintenance Schedule

Details the recommended frequency and importance of annual inspection and servicing.

Explanation of the Control Unit

Commissioning the Heating System

Commissioning: Checking System Pressure

Details the procedure for checking and adjusting the heating system pressure during commissioning.

Heating System Filling Procedures

Boiler Settings

Boiler Settings: CH Flow Temperature

Details how to set the maximum Central Heating flow temperature for radiators or convectors.

Boiler Settings: DHW Temperature

Boiler Settings: DHW Temperature

Guides on setting the Domestic Hot Water temperature, including legionella safety advice.

Operating the Heating System

Shutting Down the Heating System

Shutting Down: Standard Procedure

Step-by-step guide for safely shutting down the heating system using the control unit.

Shutting Down: Emergency Procedures

Critical steps to take for immediate shutdown in emergency situations, including power cutoff.

System Shutdown for Freezing Prevention

Freezing Prevention: System Shutdown

Procedure for draining the system to prevent damage from freezing during extended shutdowns.

Display Information

Fault Identification and Reset Process

Fault Identification and Reset Process

Explains how to identify faults via the display and the procedure to reset them.

Related product manuals