5 Heating circuit control
6 720 646 864 (12/2010) – Technical guide Logano GE315, GE515 and GE615
34
5.2.2 Telecontrol modem for optimum service
connections
The Logamatic Easycom or Logamatic Easycom PRO
telecontrol modem is at the heart of the Logamatic
telecontrol system. It connects the control system to
external devices and forwards messages about operating
faults or conditions to one or more different message
recipients, depending on the time and day. For example,
messages can be sent to email addresses, fax machines,
mobile phones, PC control centres – wherever required.
Furthermore, via digital and analogue inputs, further
devices for heating technology and building management
can be hooked up, e.g. heat and gas meters, pressure
switches or alarm systems. In the opposite direction, the
telecontrol modem enables complete monitoring and
configuration of the control system.
5.2.3 Logamatic Easycom
Benefits
• Reduced costs for smaller to medium-sized heating
systems
• Compatible with all Logamatic control systems
• Monitoring and configuration of the entire heating
system
• Up to three message recipients, including email
addresses
• One digital input to monitor external components
• User friendly software, even for use on site
Fig. 24 Logamatic Easycom telecontrol modem
5.2.4 Logamatic Easycom PRO
Benefits
• Even for larger heating systems
• Compatible with third party control units and
components
• Up to 16 different message recipients
• Memory for long term data recording
• Digital inputs for monitoring external components
• Meters can be hooked up to record consumption (gas,
oil, heat, hours run)
• Can be extended with further modules
• Emergency power module for operation independently
of mains power supply
• Operation also possible via mobile networks (GSM)
Fig. 25 Logamatic Easycom PRO telecontrol modem
5.2.5 Logamatic Service Key
Make the most of all the options for convenient and
powerful control software - not just from the office, but
also on site. The Logamatic Service Key is the mobile high
performance connection from your computer to the
heating system. Thanks to a variety of adaptors, it is easy
to connect to Buderus products with Logamatic control
systems. With a few clicks of the mouse, all operating
data can be called up and the entire system can be
configured.
Fig. 26 Logamatic Service Key
6 720 645 180-80.1il
6 720 642 347-42.1il
6 720 642 347-43.1il
To Next Page
Loading...
Need help?
General