To Next PageTo Next Page
Need help?Do you have a question about the Buderus Logano GE615 and is the answer not in the manual?
Overview of available boiler models and their power range.
Describes suitable systems and building types for the boilers.
Highlights key advantages like thermostream technology and efficiency.
Details the standard equipment and available components.
Explains the function and principle of thermostream technology.
Provides detailed dimensions and technical specifications for each model.
Specific dimensions for the Logano GE315 cast iron boilers.
Specific dimensions for the Logano GE515 cast iron boilers.
Technical specifications for the Logano GE315 cast iron boilers.
Technical specifications for the Logano GE515 cast iron boilers.
Dimensions and specifications for the Logano GE615 cast iron boilers.
Covers performance data like pressure drop, efficiency, and temperatures.
Information on pressure loss across the boiler depending on flow rate.
Details boiler efficiency at different water temperatures and loads.
Shows relationship between flue gas temp, boiler efficiency, and load.
Illustrates standby losses and flue gas temperatures at various conditions.
Information on selecting compatible oil and gas burners.
Type-testing requirements for oil and gas burners.
Guidance on overcoming boiler pressure drop and gas supply.
Lists specifications for drilled burner plates for different models.
Summarizes relevant standards and directives for boiler installation.
Details boiler classification and inspection requirements under safety acts.
Information on approved fuels like oil, gas, and biogas.
Specifies warranty conditions for boiler operation and system control.
Special requirements for operating boilers with biogas.
Guidance on preventing corrosion in heating systems and on the boiler water side.
Information on using chemical additives and antifreeze in heating water.
Recommendations for heating water quality, treatment, and scaling prevention.
Overview of Buderus Logamatic control units for boiler operation.
Details the features and capabilities of the Logamatic 4212 control unit.
Describes the Logamatic 4311 and 4312 control units and their applications.
Details remote monitoring and system management capabilities.
Describes how boilers are used for domestic hot water generation.
How DHW temperature is adjusted and controlled using control units.
Shows various hydraulic connection options for boilers in heating systems.
Outlines safety components required by DIN-EN standards.
Schematic diagrams for safety component placement for specific temperature limits.
Safety component layouts for boilers with high limit safety cut-out above 110 °C.
Example of a single boiler setup with AC pumps and oil operation.
Single boiler system with boiler and heating circuit control.
Single boiler system focusing on boiler circuit control.
Illustrates a two-boiler system with control and heating circuits.
Describes a two-boiler system with balancing for improved performance.
Two-boiler system using variable speed pumps for circuit control.
Example of a two-boiler system with boiler circuit control.
System example combining cast iron boiler with gas condensing boiler.
Guidelines for safely moving and handling boiler components.
Details the contents of the package for different boiler models.
Specifies dimensions for handling individual boiler sections.
Requirements for the installation space, including air supply and siting.
Specifies the physical size and clearance requirements for installation.
General guidance on pipework, electrical connections, and commissioning.
Details required safety components and their specifications according to standards.
Requirements and options for low water indicators to prevent overheating.
General overview of safety equipment versions and components.
Details the components and type-test approvals for safety equipment assemblies.
Options and measures for reducing noise from the boiler and flue system.
Information on flue gas silencers to reduce noise transfer via the flue system.
Details of steel/stainless steel flue gas silencers for noise reduction.
Boiler mounts designed to reduce structure-borne noise transmission.
Lists optional parts like flanges, sealing collars, and tools.
Special flanges for connecting pipes to boiler flow and return.
Butterfly valves used for hydraulic shut-off and flow rate control.
Provides a pressure-sealed connection between flue outlet and pipe.
Details compression tools for cast iron boilers, for purchase or hire.
Installation set for on-site anchoring of boiler sections.
Essential regulations and directives for flue system design and installation.
Provides crucial data on flue gas temperatures, CO2, and mass flow rates.
Specific flue gas data for the Logano GE315 boiler.
Specific flue gas data for the Logano GE515 and GE615 boilers.
General