To Next PageTo Next PageWhat to do if the gas valve does not close when disconnecting the 24-V connection in Buderus Boiler?
If the gas valve on your Buderus Boiler doesn't close when you disconnect the 24-V connection, you should replace the gas valve.
What to do if the ignition flame does not surround the thermocouple and burn evenly in Buderus Logano GC124 II/SP Boiler?
If the ignition flame on your Buderus Boiler does not surround the thermocouple and burn evenly, you should replace the thermocouple.
How to fix ignition flame if it goes out in Buderus Logano GC124 II/SP?
If the ignition flame goes out on your Buderus Boiler, check that the thermocouple is firmly screwed to the gas valve. If it is, then replace the thermocouple.
Identifies dangers using specific terms and symbols for user safety.
Details national regulations, safety devices, and operating conditions for safe boiler use.
Instructions for connecting the boiler to the heating system, including safety precautions.
Guidelines for safe and compliant electrical hookups, including grounding and wiring.
Procedures for safely connecting the gas supply, including sediment traps and local codes.
Detailed steps for initiating the boiler's operation for both GC124 II and SP models.
Procedures to check for a visible ignition spark and troubleshoot if absent.
General