10
Installation and maintenance instructions Gas Boiler Logano GC124 II/SP • Issue 07/2006
We reserve the right to make any changes due to technical modifications.
Moving the boiler5
5 Moving the boiler
This chapter describes how to move the boiler safely
into place.
5.1 Moving the boiler with boiler cart
Move the boiler with packaging in tact and on its pallet
as much as possible.
z Remove packaging straps and cardboard box from
pallet.
z Remove screws that secure the boiler base to the
wood pallet.
z Pick up boiler base from one side and slide to the
edge of the pallet. Place a steel pipe as roller under
the boiler base. Place additional steel pipes under
the boiler base and roll the boiler to its final destina-
tion.
CAUTION!
SYSTEM DAMAGE
Due to uneven and rough surfaces.
z Observe the transport diagrams on the
packaging to protect the sensitive com-
ponents from damage due to rough sur-
faces. Handle the product with care.
USER NOTE
z Protect all boiler connections from dirt if
the boiler is not installed immediately
following removal from packaging.
USER NOTE
Dispose of the packaging material in an
environmentally prudent fashion.
Fig. 4 Moving the boiler with rollers
To Next Page
Loading...
Need help?
General