To Next PageTo Next Page
Need help?Do you have a question about the Buderus Logano GA244 and is the answer not in the manual?
Defines the intended use of the GA244 gas boiler for hot water heating.
Explains the two levels of danger and warning labels used in the manual.
Details the meaning of DANGER, WARNING, and CAUTION symbols and their implications.
Provides instructions for safely moving the boiler from its packaging to the installation site.
Specifies requirements for the floor or surface where the boiler will be installed.
Outlines steps to take before beginning the boiler installation process.
Details requirements and procedures for connecting the gas supply to the boiler.
Explains derating procedures and considerations for installing the boiler at high altitudes.
Instructions for installing the horizontal wall terminal body for exhaust and air intake.
Guidelines for installing the vertical venting system, including roof penetration.
Procedures for installing the exhaust and air intake piping at the boiler.
Covers venting configuration for sealed combustion with horizontal termination.
Details venting configuration when using room air for combustion with horizontal termination.
Covers venting configuration for sealed combustion with vertical termination.
Details venting configuration using room air with vertical termination.
Safety instructions and steps for lighting the pilot and main burners.
Step-by-step guide for operating the boiler after installation.
Procedure for safely shutting off the gas supply to the boiler.
A checklist and record for initial boiler start-up procedures and measurements.
In-depth guide for taking measurements and performing start-up checks.
A log for recording yearly maintenance tasks and measurements.
Outlines the steps for performing annual boiler maintenance and inspections.
Provides guidance on diagnosing and resolving common boiler operational issues.
General