Buehler EcoMet 250 - Operating Procedures; Control Panel Functions

6
4D LABS, Simon Fraser University 8888 University Drive, Burnaby, B.C. V5A 1S6
E nanoimaging@4dlabs.ca T 778.782.8158 F 778.782.3765 W www.4dlabs.ca
Operation
Control Panel:
Figure 1: EcoMet Grinder-Polisher Control Panel Commands
Time
Water flow
(on/off)
Head rotation
direction
(Clockwise /
Anticlockwise)
Force
(N / lbs)
Increase /
decrease
Water source
(tap only)
Burst
dispenser
(on/off)
Pause / Stop
Platen only
Force mode
(single / central)
Speed
(base & head)