Buell Ulysses 2006 - User Manual

Questions and Answers

J
Joe RamirezJul 26, 2025
How to fix excessive lever travel on Buell Ulysses 2006 Motorcycle?
- W
  wesleyschroederJul 26, 2025
  If you experience excessive lever or pedal travel or a spongy feel in your Buell Motorcycle's brakes, it could be due to air in the system or a low fluid level in the master cylinder. To resolve this, bleed the brakes and fill the master cylinder with approved brake fluid.
H
Heather ZimmermanAug 1, 2025
What to do if Buell Motorcycle brake lever travels to limit?
- S
  sharonzavalaAug 1, 2025
  If your Buell Motorcycle's brake lever or pedal travels to its limit and the brake is ineffective, it could be due to a low fluid level or a malfunctioning piston cup. Fill the master cylinder with approved brake fluid and bleed the system. If the problem persists, rebuild the cylinder.
J
Jessica Wall DDSAug 5, 2025
Why is my Buell Motorcycle making a chattering sound when braking?
- W
  warnermichelleAug 6, 2025
  A chattering sound when you apply the brakes on your Buell Motorcycle can be caused by several issues: worn pads, worn D shape bushings, loose mounting bolts, or a warped rotor. Here's what you should do: * Replace worn brake pads. * Replace the rotor and bushings as a set if the D shape bushings are worn. * Tighten any loose mounting bolts. * Replace the rotor and bushings as a set if the rotor is warped.
M
michael46Aug 10, 2025
What causes ineffective brakes on Buell Ulysses 2006 Motorcycle with normal lever travel?
- K
  Kathleen NicholsAug 10, 2025
  If your Buell Motorcycle has ineffective brakes but the lever or pedal travel is normal, the issue might be a distorted or glazed rotor, or distorted, glazed, or contaminated brake pads. Replace the rotor and bushings as a set if the rotor is distorted or glazed. Replace the pads if they are distorted, glazed, or contaminated.
L
Lori ReyesAug 15, 2025
Why does my Buell Ulysses 2006 have brake fade?
- J
  Janet CooperAug 15, 2025
  Brake fade in your Buell Motorcycle could be due to moisture in the system. Bleed the brakes and replace the fluid in the master cylinder with approved brake fluid.
B
briannawilliamsAug 20, 2025
How to stop Buell Ulysses 2006 Motorcycle brake pads from dragging?
- E
  Ernest MooreAug 20, 2025
  If the brake pads on your Buell Motorcycle are dragging on the rotor and not retracting, it could be that the cup in the master cylinder is not uncovering the relief port or the rear brake pedal linkage is out of adjustment. Inspect the master cylinder and adjust the linkage.