Buffalo Tools GEN1000I - Periodic Maintenance

!
U!
DC APPLICATION
This usage is applicable to 12V battery charging.
Be sure the Economy Control Switch is turned off while charging the battery.
STOPPING(THE(ENGINE(
Turn off the power switch of the electric apparatus or
disconnect any electric devices.
Turn the POWER switch to “STOP” position.
Turn the fuel cock lever to “OFF”.
Turn the fuel tank cap air vent knob counterclockwise
to the “CLOSED” position
PERIODIC MAINTENANCE
MAINTENANCE CHART
Regular maintenance is important for the best performance and safe operation.
Item
Remarks
Pre-operation
check
(daily)
Initial
1 months
or 20 Hr
Every
3 months
or 50Hr
Every
6 months
or100Hr
Every
12 months
or 300Hr
Spark Plug
Check condition adjust gap
and clean. Replace if
necessary.
!
Engine Oil
Check oil level
!
Replace
!
!
Oil filter
Clean oil filter
!
Air Filter
Clean. Replace if necessary.
!
Fuel Filter
Clean fuel cock filter. Replace
if necessary
!
Choke
Check choke operation
!
Valve Clearance
Check and adjust when
engine is cold.
!
Fuel Line
Check fuel hose for crack or
damage. Replace if
!