EasyManua.ls Logo

Buffalo CT253 - Safety Details and Warning Signs; Safety Details Overview; Warning Signs Overview

Buffalo CT253
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7. SAFETY DETAILS AND WARNING SIGNS
Do not leave the device in or exposed to direct sunlight.
The appliance should only be operated under an extraction
canopy in accordance with DW172(2018).
If the appliance is operated with LPG, the distance between the
device and LPG cylinder should be minimum 50 cm.
Any kind of flammable solid and liquid material (cloths, alcohol
and derivatives, petrochemical products, wooden and plastic
materials, cutting blocks, curtains etc.) should never be held near
the appliance.
FIRE HAZARD - Keep the area around the appliance clear and
free from combustible materials. Do not keep flammable materials
in the vicinity of the appliance.
Install the appliance in a well-ventilated place to avoid the
creation of dangerous mixtures of unburnt gases in the room.
Please refer to the instructions before installing and operating the
appliance.
Air recirculation must take in account the air necessary for
combustion, 2 m³/h/kW gas power, and also the “well-being” of
those working in the kitchen.
The appliance should not be immersed in water.
Do not clean the appliance with pressure jet water.
This device is designed for professional use and it should
only be operated by trained personnel.
8/22
The appliance should not be serviced by anyone else except
by the manufacturer or authorized service company.
In case of fire isolate the gas supply and report to management for
escalation.
SAFETY DETAILS: