7. SAFETY DETAILS AND WARNING SIGNS
☞ Oil spilled during operation must be cleaned away. Otherwise this will
cause slip hazard.
☞ In the event of gas leak isolate the gas and report to management for
escalation.
9/22
☞ All gas connections must comply with gas safe standards.
☞ Pets should not be allowed to approach the product while the device is
running. Keep your pets away from the environment where the device is
located so that the pets will not be injured from gas accidents that may
occur.
WARNING SIGNS:
☞ Hot surface. Heat resistant safety gloves required.
☞ Caution. Hot surface.
☞ Before switching on, please remove all the production
plastic film.
☞ Gas type and pressure warning label at the gas inlet
To Next Page
Loading...