2
Safety Instructions
• Position on a flat, stable surface.
• A service agent/qualified technician should carry out installation and any repairs if required. Do not
remove any components on this product.
• Consult Local and National Standards to comply with the following:
• Health and Safety at Work Legislation
• BS EN Codes of Practice
• Fire Precautions
• IEE Wiring Regulations
• Building Regulations
• DO NOT immerse the appliance in water.
• Always switch off and disconnect the power supply to the appliance when not in use.
• Not suitable for outdoor use.
• Keep all packaging away from children. Dispose of the packaging in accordance to the regulations of
local authorities.
• Children should be supervised to ensure they do not play with, or operate the Glass Washer
• The function of this Dishwasher is the washing of Plates, Glasses and similar ONLY.
• Do not use cleaning agents that contain Chlorine, Bleach or Hypochlorite
• Only use commercial grade detergents and rinse aids in your Glass Washer
• Wear the correct personal protective equipment when handling chemicals and observe all safety
notes
• Damage to the Dishwasher caused by lime scale or poor water quality will NOT be covered by the
manufacturers warranty – fitting of a water softener is recommended
• The installer and user are responsible for ensuring the installation and operation of this Dishwasher
• Ensure the base of the unit is never submerged or standing in water when operating the Dishwasher
• Do not use electrical extension lead(s) to supply power to your Dishwasher
• If the power cord is damaged, it must be replaced by a qualified technician in order to avoid a
hazard.
• This appliance can be used by children aged from 8 years and persons with reduced physical, sensory
or mental capabilities or lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance shall not be made by
children without supervision.
• Ambient temperature where the machine is operated should be between (+5 °C / +40 °C).
• If the appliance is fed with hot supply water, water inlet temperature must not exceed maximum + 50 °C.
• The appliance is designed to operate with softened water at a Clark water hardness level of (<9
Degree Clark). Excess calcium in water supply may damage moving parts of the appliance and
decrease washing performance of the appliance regularly.
• If the appliance has to be operated continuously, then it should be paused for 1 hour for every 4 hours of
operation.
• We recommend Jantex DIshwasher Detergent (CF976) and Rinse Aid (CF977)
• BUFFALO recommend that this appliance should be periodically tested (at least annually) by a
Competent Person. Testing should include, but not be limited to: Visual Inspection, Polarity Test,
Earth Continuity, Insulation Continuity and Functional Testing.
• Buffalo recommend that this product is connected to a circuit protected by an appropriate RCD
(Residual Current Device).
To Next Page
Loading...
