Preparation for Use
At initial start up of the appliance, wait 50-60 min (depending on the dishwasher model) for the supplied water to warm
up. After the water temperature reaches ‘Factory Settings’ warning sound will ring. Appliance is designed to function
efficiently when proper temperatures are reached. If the temperatures are decreased, wait for the appliance to reach
temperature before starting a new wash cycle.
Wash Programs
Starting a Wash Cycle
Open the door, place the first basket inside the machine, check that the arms rotate freely.
Select the appropriate Washing program depending on type of dishes and degree of soiling with program selection
buttons .
The washing
process is started by pressing the washing start button . The program time
will start counting down on
the LCD display. When the washing program is finished, the machine starts rinsing. If the cabinet door is opened during
the washing process (if no button is pressed), the washing machine process will stop. When the door is closed again,
the program will continue from where it left off. When the washing process is finished, the machine beeps.
To Next Page
Loading...
