Buffalo WBMR-HP-GN - Save and Restore Configuration; Initialize or Restart Router; Firmware Update Guide

24
isanacronymofNetworkTimeProtocol.AnNTPserverdistributesaccurate
timetonetworkdevices.
Access
You may prohibit management of the AirStation in specic circumstances.
Enablinganyoftheselimitationswillpreventchangesbeingmadetothe
AirStation’s settings from PCs that meet the listed limitation criteria. Note that
checkingalloftheseboxesatoncewillmakeitverydiculttomakefuture
changes to the AirStation’s settings.
Log
YoucantransfertheAirStation’sloginformationtoaserver.
Checking “Enable” will instruct the AirStation to transmit log information to a
Syslogserver.Thedefaultsettingisdisabled.
Save/Restore
Onceyou’vegotyourAirStationsetupthewayyouwantit,youmaysave
the current conguration to a le on the PC. This can then be used to restore
settingsasrequired.
Note:
TheAirStationwillnotbeabletorestorecongurationsfromthesavelein
the following circumstances:
•Ifyoupassword-protectthebackupandthendon’tenterthepassword
correctly when restoring.
•Congurationlecreatedwithalaterversionofthermwarethanyouare
currently running.
•Congurationlewascreatedbyadierentproduct.
Initialize/Restart
SometimesitmaybenecessarytorestartorinitializetheRouterifitisnot
workingcorrectly.RestartingtheRouterwillNOTdeleteanyofyourcongu-
ration settings.
However,ifyouchoosetoinitializeyourAirStationsettingswillberestoredto
factory defaults.
Update
Fromtimetotime,BualomayreleasenewversionsoftheRouter’srmware.
Firmwareupdatescontainfeatureimprovementsandxestoproblemsthat
mayhaveexisted.WhenBualoreleasesnewrmware,youcandownload
the rmware from the Bualo website and update your Router’s rmware to
thelatestversion.