Move the switch to the middle 1 W position. If you turn the volume and gain knobs clockwise, the amp creates a thick,
rich distortion sound without hurting your ears.
If this setting is still too loud, move the POWER ATTENUATOR switch all the way left to the 0.1 W position. This may be
preferable for bedroom practice.
The V5 is also highly sensitive to changes in your guitar’s volume output. With the volume all the way up, it can sound
heavily distorted, but the tone will begin to clean up as you roll the volume down. Many players find a tone setting they
like, then use only the volume knob on the guitar for all their tonal variation.
To Next Page
Loading...
