7-22 Infotainment System
Activating the Voice Control
For vehicles without a navigation
system, press
b or b / g on the
steering wheel to activate the voice
control of the UHP system.
For vehicles with a navigation
system, press
b or b / g on the
steering wheel to activate the voice
control of the UHP system. The
system responds with a tone. After
the tone, say ”Phone.“
For the duration of the dialogue, any
audio source that is active is muted,
and any traffic news fade-in is
canceled.
Adjusting the Volume for Voice
Output
Turn the volume knob of the
infotainment system or press
the + / - buttons on the steering
wheel.
Canceling Dialogue
Any of the following will deactivate
the voice control and cancel the
dialogue:
.
Press $ / i on the steering
wheel controls.
.
Enter the command “Cancel.”
.
Do not enter a command for
some time.
.
The command is unrecognized
after three tries.
Main Menu Commands
The UHP system has a set of main
menu commands that are available
when voice control is first started.
After the voice control is activated, a
short tone indicates that the voice
control system is waiting for a
command.
Available commands:
.
“Dial”
.
“Call”
.
“Re-dial”
.
“Save”
.
“Delete”
.
“Directory”
.
“Pair”
.
“Select device”
.
“Voice feedback”
.
“Help”
.
“Cancel”
Frequently Used Commands
Here is a list of frequently used
commands:
.
“Help”: the dialogue is
terminated and all commands
available in the current context
are enumerated.
.
“Cancel”: the voice control is
deactivated.
.
“Yes”: a suitable action is
triggered depending on the
context.
.
“No”: a suitable action is
triggered depending on the
context.
To Next Page
Loading...
Need help?
General
