Buick Envista Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-18181221) - 2025
234 Vehicle Care
To access the spare tire and tools:
1
.
Open the liftgate. See Liftgate 321.
2. Lift the load floor by the handle.
3. Grasp the load floor by the sides and pull
s
lightly rearward, then slide the load floor
into the holding slots. The load floor will
stay in the open position.
4. Loosen and remove the wing nut retaining
the spare tire.
5. Remove the spare tire, jack, and tools and
place them near the tire being changed.
Removing the Flat Tire and Installing the
Spare Tire
1. Do asafety check before proceeding. See If
aTire Goes Flat 3232.
2. Turn the wheel wrench counterclockwise
to loosen the wheel nuts. Do not remove
them yet.
{ W
arning
Getting under avehicle when it is lifted
o
n ajack is dangerous. If the vehicle slips
off the jack, you could be badly injured or
killed. Never get under avehicle when it is
supported only by ajack.