Heated and Cooled Seats
The front seats may have the heated and cooled
seat feature. To heat or cool the seats, the ignition
must be on.
The buttons are
located on the front
doors forward of
the door handle.
J (Heated Seat Cushion and Seatback): Press
this button to heat the seat cushion and seatback.
I (Heated Seatback): Press this button to
heat the seatback.
H (Cooled Seat Cushion and Seatback): Press
this button to cool the seat cushion and seatback.
Press each button to turn on the desired feature.
A light on that button will display indicating
which feature is on.
There are three temperature settings for each
feature. A column of three lights next to the buttons
will display which setting the feature is in: high,
medium or low. Three lights indicate the highest
setting, two lights indicate medium and one light
indicates the lowest setting.
When you press a button, the feature will turn on
at the highest setting. Each time you press the
button, the feature will decrease one temperature
setting.
To turn the feature off, keep pressing the button
until the display lights turn off.
If your vehicle has remote vehicle start and is
started using the remote keyless entry transmitter,
the front heated seats will be turned on to the
high setting if it is cold outside. See “Remote
Vehicle Start” under Remote Keyless Entry (RKE)
System Operation on page 96. When the key is
inserted into the ignition and the ignition is turned
on, the heated seat feature will turn off. To turn
the heated seat feature back on, press the desired
button.
Driver’s Side Buttons
shown
12
To Next Page
Loading...
Need help?
General
