Outside Power Mirrors
The controls for the
outside power mirrors
are located on the
driver’s door armrest.
Press the left or right side of the selector switch
located beneath the control pad to choose the left
or right mirror.
To adjust the mirror, press one of the four arrows
located on the control pad to move the mirror
in the direction you want it to go. Adjust each
outside mirror so that you can see a little of your
vehicle, and the area behind your vehicle.
The mirrors may also have an arrow that flashes
when the turn signal is used. See Turn and
Lane-Change Signals on page 164.
Outside Curb View Assist Mirror
If your vehicle is equipped with memory mirrors,
it will also be capable of performing the curb view
assist mirror feature. This feature will allow the
driver’s and passenger’s side mirror to tilt to
a factory programmed position when the vehicle is
in REVERSE (R). This feature may be useful in
allowing you to view the curb when you are parallel
parking.
When the vehicle is shifted out of REVERSE (R)
or the ignition is turned to off, the driver’s and
passenger’s side mirror will return to its original
position.
See DIC Vehicle Customization on page 233 for
more information.
135
To Next Page
Loading...
