The air conditioning system removes moisture
from the air, so you may notice a small amount of
water dripping underneath your vehicle while
idling or after turning off the engine. This is normal.
: (Outside Air): This mode allows outside
air to enter the vehicle. It can be used to prevent
the inside from becoming too dry. Press this
button to turn outside air on. Pressing the
recirculation button will cancel this mode. When
the button is pressed, an indicator light will turn on.
? (Recirculation): Press this button to keep
outside air from coming in the vehicle. It can be
used to prevent outside air and odors from entering
your vehicle or to help cool the air inside your
vehicle more quickly. Press this button to turn the
recirculation mode on or off. When the button is
pressed, an indicator light will come on.
wx (Driver’s Temperature Controls): Press
these buttons next to the fan control to manually
increase or decrease the temperature inside
your vehicle.
wx (Passenger’s Temperature Controls):
Press these buttons next to the mode control to
manually increase or decrease the temperature for
the front passenger. If the passenger’s climate
control system is off, pressing one of these buttons
will turn it on.
PASS (Passenger’s Climate Control): Press this
button to turn the passenger’s climate control
systems on or off.
If the PASS button is pressed to turn the
passenger temperature setting off, the driver’s
temperature setting will control the temperature for
the entire vehicle.
190
To Next Page
Loading...
