To change the time default setting from 12 hour
to 24 hour, press the
H button and then the
pushbutton located under the forward arrow label.
Once the times 12H and 24H are displayed,
press the pushbutton located under the desired
option to select the default. Press the
H button
again to apply the selected default, or let the
screen time out.
With Date Display
Single CD (MP3) Player
This type of radio has a H (clock) button for
setting the time and date.
To set the time and date, follow these instructions:
1. Turn the radio on.
2. Press the
H button and the HR, MIN, MM,
DD, YYYY (hour, minute, month, day, and
year) displays.
3. Press the pushbutton located under any
one of the labels that you want to change.
Every time the pushbutton is pressed again,
the time or the date if selected, increases
by one.
• Another way to increase the time or date, is
to press the right SEEK arrow or
\ FWD
button.
• To decrease, press the left SEEK arrow or
s REV button. You can also turn the
f (tune) knob, located on the upper right
side of the radio, to adjust the selected
setting.
The date does not automatically display. The only
way to see the date is by pressing the
H button
when the radio is on. The date with display times
out after a few seconds and goes back to the
normal radio and time display.
245
To Next Page
Loading...
