2. If the child restraint manufacturer recommends
that the top tether be attached, attach and
tighten the top tether to the top tether anchor,
if equipped. Refer to the child restraint
instructions and the following steps:
2.1. Find the top tether anchor.
2.2. Flip open the top tether anchor trim
cover to expose the anchor.
2.3. Route, attach and tighten the top
tether according to your child restraint
instructions and the following
instructions:
If the position you are
using does not have
a head restraint and
you are using a single
tether, route the tether
over the seatback.
If the position you are
using does not have a
head restraint and you
are using a dual tether,
route the tether over the
seatback.
If the position you are
using has a fixed head
restraint and you are
using a single tether,
route the tether over
the head restraint.
62
To Next Page
Loading...
