Bunn DUAL SH - Adjusting Brewer Settings and Parameters; Setting Tank Water Temperature; Adjusting Batch Volumes and Bypass; Pulsed Brewing Parameter Configuration

ITEM PART NO. QTY. DESCRIPTION
7
DIGITAL BREWER CONTROL ASSEMBLY
1 32245.0000 1 Bracket, Mounting
00970.0000 2 Nut, Keps #8 - 32
2 25654.0000 1 DBC Display Assembly
02328.0003 2 Screw, Pan Head #6 - 32 x .312"
3 05920.0000 1 Clamp
4 12568.0003 1 Sensor, Temperature
5 26263.0000 1 Clamp, Steel .12"/.19"
01382.0000 1 Screw, Truss Head #6 - 32 x .375"
00973.0000 1 Nut, Keps #6 - 32
6 01667.0000 1 Terminal .25
7 12570.0000 1 Grommet, Temp. Sensor
8 20948.0001 1 Bracket, Component Mounting
02308.0000 4 Screw, Pan Head #8 - 32 x .375"
9 25468.0006 1 DBC Power Board Assembly (Brewer P/N 27900.0021)(Includes item 10)
25468.0007 1 DBC Power Board Assembly (Brewer P/N 27900.0022)(Includes item 10)
02308.0000 2 Screw, Pan Head #8 - 32 x .375"
10 27035.0000 1 Fuse, AGC 5 AMP 250V
11 25513.0000 1 Receptacle, Display
01388.0000 2 Screw, Truss Head #6 - 32 x .75"
00973.0000 2 Nut, Keps #6 - 32
12 01533.0000 2 Spacer, Nylon .375"
13 07441.0000 1 Bracket, Mounting
01347.0000 2 Screw, Truss #6 - 32 x .375"
00973.0000 2 Nut, Keps #6 - 32
14 25662.0002 1 Cord Assembly, Display 12.0" (Not illustrated)
32249 110501