13
PROGRAMMING
Using the menu-driven display on the front of the brewer, the operator has the ability to alter or modify various
brewing parameters such as brew temperatures, brew volumes, dilution volumes, pulse brew, etc. This allows
for the precise brewing of various flavors of tea and coffee.
Programming of the brewer is achieved by entering a certain function. Then, by the use of hidden
programming switches and the brew/function switches, the operator can customize the brewing process to their
specifications.
PROGRAMMING SWITCHES
To access the programming mode, and to scroll through the different function screens, hidden programming
switches are used. There are five of these switches that will be used for the setup of the brewer.
a) Right Programming (hidden) switch (just to the right of the display): This is used to access the programming
mode, and is also used to scroll forward through the function list.
b) Left Programming (hidden) switch (just to the left of the display): This is used to scroll backwards through
the function list.
c) Brew A,B,C (Digital Brewer Control - Twins Only): Used to select options that appear on the display during
programming.
For more advanced PROGRAMMING information,
refer to programming manual at www.bunn.com
ITB
ITCB-DV & HV
36748.3 111010
ITCB-TWIN HV
HALF
FULL
BREW
A
BREW
B
BREW
C
®
ENABLE
ON / OFF
BREW
G
D
B
C
A
F
E
D
B
C
A
F
E
ENABLE
ON / OFF
ENABLE
ON / OFF
BREWBREW
®
c
a
B
To Next Page
Loading...
Need help?
General
