Page 13
prevent a funnel overfl ow.
RECIPE: Set of brewing parameters stored in the brewer. The parameters are unique for each tea and coffee
name. Tea recipes include brew ounces, dilution ounces, dilution delay, pulse brew, and drip time. Coffee recipes
include brew ounces, pulse brew and drip time.
RECIPE CARD: An assembly consisting of a computer chip and an instruction label. Used for loading a recipe
into the brewer and the companion DBC Grinder.
RECIPE TEMPS: Allows a different temperature to be set for each brew recipe.
NOTE – Using this setting will override the Master Temp setting. The tank will hold at the lowest set temperature.
A short heating time may be required if all brew recipes are not set at the same temperature.
SANITATION MODE: If enabled, the brewer will display a message after a set amount of time indicating the ma-
chine needs cleaning and sanitizing.
TEA 1, TEA 2, TEA 3, HOT TEA, ICED COFFEE, NO-NAME COFFEE: The preset recipes stored in the brewer. Used
by the brewer when there is no coffee name stored in the Smart Funnel or if a recipe card is not used.
WARNING TIME (FRESHNESS TIMER): If the Freshness Timer is enabled, the length of time from when the brew
was completed until a “Freshness Alert” message will display, communicating that a fresh batch of product needs
to be brewed.
GLOSSARY (Continued)
36748 080904
To Next Page
Loading...
Need help?
General
